Software Description: Simplify3D v4.0.1 x86/x64 Keygen Serial
Simplify3D translates 3D models intoinstructions your printer understands. Better instructions meanbetter prints, so a simple software upgrade makes all thedifference in the world.
In fact, more than 90% of experts agree that 3D printing softwarehas the greatest impact on print quality, even more so than the 3Dprinter itself!
Simplify3D is compatible with more 3D printers than any othersoftware available. Chances are, your printer is supported!
You invested a lot of time and money into your 3D printer – infact, most people spend more than 80 hours researching their first3D printer! 2
Isn’t it worth spending five minutes learning how to optimize yourprinter with Simplify3D, the most powerful 3D printingsoftware?
Here are some key Features of “Simplify3D”:
Import, scale, rotate and repair your 3D model until it is justright.
Apply customizable settings for complete control over yourprint.
Preview and perform countless iterations with our super-fastslicer.
Use an SD card or USB to initiate your stunning print!
SIMPLIFY THE PROCESS, IMPROVE THE RESULTS
No need to patch together multiple software applications! Onepowerful application allows you to import, manipulate, repair,slice, preview, and start printing a 3D model in a matter ofminutes.
– Access more than 100 pre-configured profiles, optimized for yourprinter.
– Adjust as few or as many settings as you wish.
– Print over USB or with an SD card.
Slice your 3D models in seconds, not minutes. Simplify3D is thefastest slicer on the market, allowing you to quickly and easilyperform multiple iterations in order to achieve the bestquality.
– Slice complex prints in mere seconds.
– Preview your 3D part to identify potential areas ofimprovement.
– Tweak settings, slice, and repeat as many times as you needto!
Support generation doesn’t get any easier than this. Automaticallygenerate support based on overhang angles, then add or removesupports as needed.
– Customize the placement, size, and angle of supportmaterial.
– Snap off supports easily without damaging your part.
– Enjoy the best of both worlds — sufficient support and cleanersurface finishes.
Optimized Dual Extrusion
Create stunning dual-color parts with Simplify3D’s Dual ExtrusionWizard. Unique features prevent filament from oozing on your print,resulting in crisp, sharp definition between colors.
– Streamline the setup of dual-extrusion print jobs.
– Protect your part from blobs and defects using the Ooze Shieldand Prime Pillar.
– Print the part in one material and the support structures inanother, allowing you to use dissolvable filament.
Simplified Multi-Part Printing
Load up the build plate! Easily print multiple parts to save timeand increase efficiency.
– Quickly manipulate where parts are placed to make the most of thebuild space.
– Control whether to print continuously layer-by-layer orsequentially.
– Change settings such as infill, support generation, layer height,and temperature for each part as needed.
Better 3D Printing Results
Stop wasting time, money, and filament on failed or imperfectprints. The highly detailed animated Preview Mode allowsyou to visualize every aspect of your print before sending ajob to the printer.
– Achieve fine levels of quality with advanced print settings.
– Estimate print time, material quantity and cost beforeprinting.
– Preview your print line-by-line or layer-by-layer.
Installer Size: 39 + 44 MB