Software Description: StructurePoint spFrame v1.50 + spBeam v5.00 + spWall v5.01 + spSlab v5.00 + spColumn v6.00 + spMats v8.12 Cracked
StructurePoint originated over half a centuryago as the Engineering Software Group of the Portland CementAssociation (PCA) in 1958. The group created software to providedesign aids and automatic calculations for structural engineers toanalyze and design reinforced concrete structures.
spSlab, formerly pcaSlab and ADOSS, is used fornew designs or investigation of existing structural members subjectto flexure, shear, and torsion (equilibrium, or compatibility).With capacity to integrate up to 20 spans and two cantilevers of awide variety of floor system types, spSlab is equipped to providecost-effective, accurate, and fast solutions to engineeringchallenges. spSlab calculates one-way (beam) and two-way (punching)shear around columns and drop panels, immediate and long termdeflection.
spBeam, formerly pcaBeam and ADOSS, can be usedfor new designs or investigation of existing structural memberssubject to flexure, shear, and torsion (equilibrium, orcompatibility). With capacity to integrate up to 20 spans and twocantilevers of wide variety of floor system types, spBeam isequipped to provide cost-effective, accurate, and fast solutions toengineering challenges.
spWall, formerly pcaWall/PCA-Tilt/TILT, is aprogram for design and analysis of cast-in-place reinforcedconcrete walls, deep beams, coupling beams, tilt-up walls, ICFwalls, and precast architectural and load-bearing panels.
spMats, formerly pcaMats and MATS, is equippedwith the latest American (ACI 318-14) and Canadian (CSA A23.3-14)concrete codes. spMats is utilized by engineers worldwide tooptimize complicated foundation design,and improve analysis of soilstructure interaction.
spFrame, formerly pcaFrame, has a fast and robustyet simple graphic interface that displays the modeled structure,the input loads, the deflected shape, and the resulting moment andshear diagrams. The graphic interface allows zooming, translating,rotating, and selective viewing of the graphical image.
spColumn, formerly pcaColumn, PCACOL, and IrrCOL,spColumn investigates sections that are impossible to find ondesign charts or to do by hand. The section can be rectangular,round or irregular, with any reinforcement layout or pattern. Theprogram offers investigation of irregularly shaped, reinforcedconcrete column sections that may contain openings or boundaryelements.
Installer Size: 360 MB